|
RT-300 in white
powder-coat.
A Mounted Remote-Troll
|
|
RT-300
The RT-300 mounts to a bracket (which we supply) that is attached to your boat.
By undoing just two bolts it is easily removed for maintenance or a day of water skiing.
We have brackets for nearly every type of boat whether for swim platform, transom or pontoon.
Remote-Trolls are fabricated of marine grade aluminum for quality, durability and strength-without-weight.
For precision, parts are prepared using a computer controlled, high pressure water jet cutter.
Parts are then assembled, welded and powder coated in either white or silver.
Remote-Trolls are powered by a 12 Volt DC, 3 AMP, electric motor and do not require a
separate battery.
Kits come complete with mounting bracket, electrical plugs, stainless bolt set and a control switch with 20' cord.
Everything is warranted for one year.
|
|
RT-85 Compact
in white powder-coat |
|
RT-85 Compact
The RT-85 Compact is used on pontoon boats or boats with swim platforms that are 10" or less from the top of the platform to the water.
For these boats fishermen have a choice between the RT-85 Compact or the RT-300-TOP (Top mount brackets).
If steering system must be removed for other boat use, the RT-300 should be used because removal of the
two bolts allows system to be lifted off leaving just the two mounting brackets.
The RT-85 is recommended if removal is not required.
Note: The trolling motor mounts about 8" closer to the end of the swim platform when using the RT-85 model.
|
Wireless Controller |
|
Wireless Option
A wireless Control option is available for our current Remote-Troll models or for retrofit to older models already in use.
Easily installed, the kit includes a receiver box, two transmitter "fobs" and manual.
(Option not available for Model RT-10 series unless converted to newer motor.)
|
